Overhead Transmission Line Conductor Bare Insulation Material 95mm2 Nominal Area

Product Description

Overhead Transmission Line Conductor Bare Aluminum Alloy Conductor AAAC 95MM2

Quick Details

Packaging & Delivery

Packaging Details: New wooden drum, Reel, Circle or according to customer's request
Delivery Time: According to customer's request, usually 2-4 weeks.

Description

The bare conductor:AAC,AAAC,ACSR,AACSR,ACAR and Galvanized steel wire, are used in overhead electric power transmission and distribution lines with various grade voltage.
 

Service Performance

1. High tensile strength
2. Long life
3. Light in weigh
4. Suitable for high as well as extra high overhead

Construction

AAAC cable bvconsists of aluminum alloy wires. The aluminum alloy wires are concentrically stranded.
This section deals with heat-treatable magnesium silicon type aluminium alloys to the applicable International Standard, the electrical and mechanical properties of which all fall within the values suggested by relevant standard. Conductors to all other recognized specifications can also be supplied. The alloys referred to have higher strength but lower conductivity than pure aluminium. Being lighter, alloy conductors can sometimes be used to advantage in place of the more conventional ACSR; Having lower breaking loads than the later, their use becomes particularly favourable when ice and wind loadings are low.

Anti-corrosion

Anti-corrosion ACSR is used in the corrosive areas like coastal areas or industrial zones. This ACSR is filled with anti-corrosive grease applied on the gaps between stranded wires and their external surfaces.

Generally, anti-corrosion ACSR is divided into three types according to the method of greases coating :
*Light Anti-corrosion Type : Only steel wires are coated
*Medium Anti-corrosion Type : All the inner layers are coated
*Heavy Anti-corrosion Type : All the inner and outer layers are coated

Features

• High strength to weight ratio
• Better sag characteristics
• Improved electrical properties
• Excellent resistance to corrosion

Application

Aluminium Conductors are predominantly used in Overhead Line applications and for primary and secondary power distribution.

All Aluminum-Alloy Conductors (AAAC) can be used in Medium, High and Extra-High voltage transmission lines. AAAC offers better sag performance due to the high strength-to-weight ratio provided by the aluminum-alloy. In addition, AAAC provides a higher corrosion resistance than ACSR conductors.

Specification

(1) all aluminium conductor (AAC)
(2) all aluminimum alloy conductor(AAAC)
(3) aluminum conductor steel reinforced (ACSR)
(4) anti-corrosion type ACSR
(5) aluminimum conductor aluminimum clad steel reinforced(ACSR/AW)
(6)rear earth aluminimum conductor steel reinforced(ACSR/RE)
(7)aluminimum conductor aluminimum alloy reinforced(ACAR)

Relative manufacturing standards

Our Bare conductor can meet or exceedthe item of cable international standards.
such as:
AAC : IEC 61089, ASTM B231, BS 215 part1, DIN 48201 etc.
AAAC : IEC 61089, ASTN B399, BS EN50183, BS 3242, DIN 48201 etc.
ACSR : IEC61089, ASTM B232, BS 215 part2, DIN 48204 etc.
ACAR : ASTM B524, IEC 61089 etc.
AACSR : ASTM B711, DIN 48206, IEC 61089 etc.

However, XYHY can also supply a range of alternative designs to meet customer-specified requirements.

ELECTRICAL PROPERTIES

linear Expansivity 23 x10-6 (°C)